Your shop runs on
sharp tooling.
Ours runs on software.
Ciklek manages your cutting tools the way a fleet company manages your vehicles — we track every blade, handle every service, and tell you when to retire before you have a problem.
You just run production.
Free audit — no commitment. We bring the scanner. Takes 30–60 min.
Trusted by 120+ cabinet and woodworking shops across the US
The real cost of dull tooling
You already know the pain.
Here's what it actually costs.
Most cabinet shops are absorbing thousands of dollars a month in hidden tooling costs — scrap, downtime, emergency sharpening, and over-retained blades. The audit makes it visible.
Tearout on expensive hardwood
A dull 80T ATB blade doesn't cut — it tears. On figured maple or quartersawn white oak at $18–$25 per board foot, one bad panel wipes out the margin on the entire job. You're not saving money by running a blade one more week.
Carbide tips are a safety incident waiting to happen
A carbide tip that lets go at 4,000 RPM becomes a projectile. Most shops have no way of knowing how many cycles a blade has been through or whether it's approaching structural failure. Ciklek tracks it.
Emergency sharpening stops production
When a blade goes dull mid-run, someone drives it to the sharpening shop, waits, and drives back — or you swap to a substandard blade and accept worse cuts. A managed service means it never gets to that point.
Zero visibility into your tooling inventory
Ask most shop owners how many times their best blade has been sharpened. They don't know. Which blades are sharp? Which need service? Which should be retired? Ciklek answers all three, in real time.
How much is your shop losing?
Our free audit quantifies it. We scan your inventory, review your last 90 days of production, and put a real dollar figure on the tooling problem. Most shops are surprised.
How it works
Sharp tools.
Zero disruption.
Three steps. Your production never stops. Every tool tracked from pickup to delivery.
We pick up
Schedule a pickup window that fits your production schedule. A Ciklek driver scans every tool's QR code at your shop — circular blades, router bits, planer knives, end mills — and takes them away.
We send to the experts
Your tools ship to our partner service center with a work order specifying the exact geometry for each tool — hook angle, bevel, carbide grade, grind wheel, tolerances. They sharpen to spec and ship back.
We verify and deliver
Every tool is QC-checked against its spec when it returns. Measurements logged. Photos taken. Anything outside tolerance is flagged before it gets back to your shop. Then it's back on your floor, sharp and tracked.
The spec sheet difference
Every tool has a technical contract
Generic sharpening shops grind everything to a standard angle. We maintain a per-tool specification — hook angle, bevel, carbide grade, preferred grind wheel, tolerances — and send it with every batch. Your Freud ATB blade comes back sharpened the same way every single time.
- Hook angle & bevel targets with ±tolerance band
- Carbide grade and coating specifications
- Preferred grind wheel (CBN, diamond, aluminum oxide)
- Plate thickness tracking — retire before it's unsafe
- Maximum resharpening cycles enforced automatically
Two ways to work with us
Choose your level of
hands-off.
We manage your blades.
You own them.
Recurring pickup and delivery. Every tool tracked, spec'd, and serviced on schedule. You keep your tooling inventory — we make sure it's always sharp and safe.
- QR tracking on every tool
- Standing spec sheet per blade
- Pickup on your schedule
- Work order sent with every batch
- QC verification on return
- Retirement and wear alerts
- Full service history portal
We own the blades.
You never think about them.
One flat monthly fee. Ciklek supplies your tooling inventory, services it, and replaces retired tools automatically. No purchase orders. No sourcing. No inventory to manage. Just production.
- Everything in Managed Service
- We supply and own the tool inventory
- Retired tools replaced automatically
- Discounted tooling through our distributor network
- One flat monthly cost — no surprise purchases
- Dedicated account manager
- Multi-location support
Custom pricing based on tooling inventory size and pickup frequency
✦ Buy tooling through Ciklek and pay less
We have volume agreements with Freud, CMT, Amana, and Leuco. Every tool you buy comes pre-registered — QR-labeled and spec'd before it even arrives at your shop. Typically 10–20% below street price.
Features
Built for the shop floor
Every feature exists because a shop owner told us something was broken.
QR tracking per tool
Every blade, router bit, and planer knife gets a unique QR label. Scan in, scan out. Full chain of custody from your shop to service center and back.
Standing spec sheets
Hook angle, bevel, carbide grade, grind wheel, tolerances — stored per tool. Your Freud ATB comes back the same way every single time.
Multi-shop batch shipping
We consolidate tools from across all your locations into a single service batch. One shipment, one work order, maximum turnaround efficiency.
Work order PDFs
A printed spec sheet ships with every batch. The service center knows exactly what to do with each tool — no calls, no guesswork.
Plate thickness tracking
Each service cycle removes material. We track plate thickness over time and flag tools approaching the minimum safe threshold before they fail.
Retirement & cycle alerts
Max resharpening cycles enforced per model. System alerts you when a tool is due for replacement — before it throws a tip mid-cut.
QC verification on return
Returned tools are checked against their spec before going back to your shop. Actual vs target measurements logged. Photos taken. Nothing skips QC.
Customer portal
See every tool, every service event, every batch status in real time. Download spec sheets, service history, or retirement reports.
Automated invoicing
Invoice generated and emailed after every delivery. Itemized by tool and service type. Pay online. Syncs to QuickBooks.
Discounted tooling supply
Buy replacement blades through Ciklek at volume pricing — typically 10–20% below retail. Pre-registered before arrival.
Blade-as-a-Service
Flat monthly fee covers supply, service, and replacement. We own the inventory. You run production and never touch a purchase order.
Multi-location accounts
Multiple shops, one account. Separate pickup addresses, combined billing. Account managers see everything across all your sites.
From the shop floor
What shops are saying
"We were running a Freud blade until the tips were basically gone. Nobody noticed because we had no tracking. Ciklek flagged it in the first audit. That blade would have thrown a tip into a $6,000 sheet of veneer."
Dale H.
Owner · Summit Cabinet Co., Portland OR
"The spec sheet is the thing that sold me. Every other service just sharpens to whatever angle they feel like. These guys send a work order with the exact hook angle and tolerance. Our cuts are consistent in a way they've never been before."
Renee V.
Production Manager · Redwood Millworks, Sacramento CA
"We run 40 router bits across three CNC machines. Keeping track of which ones are sharp, which are due, and which need replacing was a part-time job. Now I look at a dashboard. It's embarrassingly simple."
Tony M.
Shop Foreman · Apex Sign & Graphics, Phoenix AZ
"We switched to Blade-as-a-Service six months ago. Tooling just shows up. Dull tools get swapped. I haven't written a purchase order for a saw blade since. That alone is worth it."
Sandra K.
Operations Director · Pacific Metal Works (3 locations)
Free blade audit
We'll tell you exactly
what's at risk —
before you sign anything.
A Ciklek rep visits your shop, scans every tool in your inventory, and produces a report showing exactly which blades are past their limit, which are running dull, and what it's costing you in scrap and machine wear. No pitch. Just data.
Book a free auditTakes 30–60 min. No commitment. We bring the scanner.
Your audit report includes:
Pricing
Simple, predictable pricing
Start with a free blade audit. No credit card. No commitment. We'll show you the exact ROI before you sign anything.
Starter
For small shops with straightforward tooling needs.
- QR tracking on all tools
- Standing spec sheet per blade
- Work order PDF with every batch
- Wear & retirement alerts
- Customer portal
- Automated invoices
Professional
For active shops running multiple machines and tool types.
- Everything in Starter
- Rush service available
- Before & after QC photos
- Plate thickness history charts
- Multi-location support
- QuickBooks sync
- API access
Enterprise / BaaS
For high-volume operations or full Blade-as-a-Service.
- Everything in Professional
- Blade-as-a-Service option
- We supply & own tooling inventory
- Discounted tooling pricing
- Dedicated account manager
- SLA guarantee
- ERP/MES integration
- Onsite setup & training
All plans include free onboarding, QR label printing, and your first pickup. Questions? Let's talk.
Get started
We track every blade,
handle every service,
and tell you when to retire
before you have a problem.
You just run production.
Serving woodworking, metal fabrication, and plastics shops across the US.
For investors
A recurring-revenue SaaS business in a
$2.2B fragmented market
200,000+ cabinet and woodworking shops in the US, each spending $15,000–$50,000/year on cutting tooling. A fragmented market served by phone-and-van operators with no software, no tracking, and no data. Ciklek is the first managed service with a full SaaS platform, per-blade spec intelligence, and a Blade-as-a-Service model that structurally prevents churn.
Deck available on request